Vibration and Temperature Monitoring Device focuses on electromechanical equipment as the monitoring subject. It primarily utilizes the GBD20 mining intrinsically safe vibration sensor and the GWD100 mining intrinsically safe temperature sensor to collect vibration and temperature data from bearings, electric motors, and gearboxes of the electromechanical equipment. The data is transmitted to the ZJZW127-Z mining vibration and temperature monitoring device host for real-time display. When abnormalities are detected, the system promptly issues alarms, thereby providing a better understanding of the equipment's operational status and aiding in the management and use of electromechanical equipment.

Technical Parameters

1. Working voltage: AC85~240V;

2. Input apparent power: ≤50VA;

3. Host display temperature measurement range: (0~100)℃, display resolution: 0.01℃;

4. Host display speed measurement range: (0~20)mm/s, display resolution: 0.01mm/s;

5. Input signal: 16 channels of analog signal (4~20)mA.

Working Principle

The Vibration and Temperature Monitoring Device works on the basis of sensor technology. A sensor is a device capable of converting physical quantities into electrical impulses. It can detect characteristics such as vibration and temperature in the equipment. Accelerometers, displacement sensors, temperature sensors, and so on are common types of sensors. These sensors transform measured physical quantities into electrical signals, which are then processed and evaluated by signal processors before the data is presented on the display.

Advantages

Real-time monitoring

The Vibration and Temperature Monitoring Device can monitor equipment characteristics such as vibration and temperature in real time, allowing for the early detection of equipment failures and abnormal circumstances.

High-precision measurement

The Vibration and Temperature Monitoring Device uses high-precision sensors and signal processors to accurately monitor equipment vibration, temperature, and other parameters.

Multi-parameter monitoring

The Vibration and Temperature Monitoring Device can monitor various parameters, such as vibration and temperature, at the same time, allowing you to completely grasp the equipment's operational status.

Remote monitoring

The Vibration and Temperature Monitoring Device supports remote monitoring using network technology, allowing users to comprehend the equipment's operational state at any time and from any location.

Data analysis and diagnosis

The Vibration and Temperature Monitoring Device can analyze and diagnose observed data, allowing users to rapidly and precisely identify the cause and location of equipment failure.

Installation

Both the GBD20 mining intrinsically safe vibration sensor and the GWD100 mining intrinsically safe temperature sensor use strong magnetic probes. They can be easily installed by attaching their probes to the surface of the object being monitored, making the installation process convenient.