Knowledge
-
26
Jan
How to ensure the safety of intrinsically safe vibration sensors?I. System-level Safety: Building a Complete Intrinsically Safe Protection System 1. System Integrity: Sensors must be used in conjunction with intrinsically safe safety barriers, isolation barriers, a
Read More -
23
Jan
What tools are needed to install an intrinsically safe vibration sensor?I. Basic Installation Tools Measuring and Positioning Tools: Ruler, spirit level (for precise positioning). Fixing Tools: Screwdriver, wrench (for tightening bolts), electric drill (for drilling holes
Read More -
22
Jan
How long is the lifespan of an Intrinsically Safe Sensor?Key Factors Affecting Lifespan 1. Design and Manufacturing Quality: High-quality sensors use more durable materials and processes. 2. Operating Environment: Harsh environments (such as high temperatur
Read More -
19
Jan
How to Properly Install Intrinsically Safe Sensors?I. Pre-Installation Preparation 1. Define Needs: First, determine what you need to measure (e.g., temperature, pressure, rotational speed), then select the appropriate sensor model based on the measur
Read More -
16
Jan
How to Prevent Failures in Intrinsically Safe Sensors?I. Regular Calibration and Maintenance Calibration Cycle: At least once a year; in high-frequency or harsh environments (such as chemical plants), this can be shortened to every 3-6 months. Maintenanc
Read More -
14
Jan
What are some common faults of intrinsically safe sensors?I. Inaccurate Readings Causes: Incorrect installation location (e.g., too close to metal), sensor aging, environmental interference, or improper calibration. Symptoms: Fluctuating data, or completely
Read More -
12
Jan
What are the calibration steps for intrinsically safe sensors?I. Preparation before calibration 1. Select standard equipment: The accuracy should be one level higher than the sensor, for example, use a 0.1-level standard source to calibrate a 0.5-level sensor. 2
Read More -
09
Jan
How to extend the lifespan of intrinsically safe sensors?I. Selection Stage: Match the application scenario and allow sufficient margin. Explosion-proof rating: Select Ex ib for coal mines, and Ex ia for chemical plants; do not confuse them. Environmental c
Read More -
07
Jan
What is the lifespan of intrinsically safe sensors?I. Lifespan Range 1. Industrial Environment: Under normal use and maintenance, the lifespan is typically 5 to 10 years. 2. Mining Environment: For example, methane sensors, with proper maintenance, ca
Read More -
05
Jan
How to Properly Install an Intrinsically Safe Sensor?I. Pre-Installation Preparation 1. Define Needs: First, determine what you want to measure (e.g., temperature, pressure, or rotational speed), then select the corresponding sensor model, paying attent
Read More -
02
Jan
What are some common problems with the grounding devices of explosion-proof c...I. Inadequate Grounding Resistance Problem: Resistance value exceeds the standard (e.g., >10Ω for ungrounded neutral systems, >4Ω for grounded systems). Possible Causes: High soil re
Read More -
31
Dec
How to Prevent Grounding Faults in Explosion-Proof Cameras?I. Regular Inspection: Early Detection and Remediation 1. Visual Inspection: Check the casing weekly for cracks, rust, or deformation, paying particular attention to sealed areas such as the cable inl
Read More





